Double Macroscopy Cabinet MK2

• The cabin is designed for macroscopy operations.
• The cabin's worktop is constructed of 1.5 mm-thick 316-grade stainless steel.
• The surfaces of the cabin, excluding the worktop, are constructed of 1 mm-thick 304-grade stainless steel.
• The cabin's worktop is sloped to facilitate fluid flow.
• The vacuum channels are located at the height of the worktop and are at a 90-degree angle to the work area to maximize the use of the workspace.
• Ventilation of the cabin is provided by an independent fan connected to the cabin.
• The fluorescent lighting system directly illuminates the workspace, and lighting control is provided by both buttons and sensors.
• The cabin includes a surface wash feature for the worktop, which is controlled by both buttons and sensors.
• The cabin also features a ½ hp waste grinding system, which is controlled by both buttons and sensors.
• The cabin is equipped with a hot and cold water faucet system, controlled by both a button and a sensor.
• The cabin has a formaldehyde faucet connected to an automatic formaldehyde system, which will be installed separately from the hot and cold water systems.
• The formaldehyde faucet is equipped with a separate sink and waste tank.
• The cabin includes a magnifying glass, magnetic hanger, paper towel holder, steel ruler, a 350*250*25 mm polyethylene work surface, and a 304-grade stainless steel glove box holder.
• A scale is included with the cabin. The scale's measuring range is 1kg-5kg.
• The lower section of the cabin features a sliding-door cabinet. The upper section features a single-section shelf.
• For electrical safety, a residual current device (RCD), protective switch, emergency off button, and an isolated grounded socket. Furthermore, if power is restored after a power outage during operation, the device will not automatically activate; the user must operate the device by pressing the on/off button.
• The device is connected to the ventilation ducts via a flexible hose.