Side-Opening Morgue Unit – Two Body Capacity (TGY2)

bii! HTML etiketleri koruyarak metninizi İngilizceye çevirdim: html Kopyala Düzenle

• Made from AISI 304 grade stainless steel material.
• Capacity for 2 bodies.
• Operates with 2 motor units.
• Manufactured with Disassembled Motor Technology, allowing service personnel to repair motor unit faults without entering the chamber.
• Side loading.
• Operating temperature: 0 °C / +5 °C (Optional: -20 °C)
• The unit is produced as a single piece.
• Unit insulation: polyurethane compressed at 40-42 kg/m³ density.
• Insulation thickness is 40 mm.
• Plastic-based seals are used on door frames to prevent conduction of cold air inside the unit to the outer sheet metal. The seals have plastic bearings and are replaceable.
• Each chamber is operated by a digital numeric display placed on the motor cabin, preventing accidental operation of the wrong chamber.
• The unit has an automatic defrost system, and defrost timing can be set via digital displays.
• The unit includes 2 body trays sized 590*1930*10 mm. The trays are 30 mm high and 10 mm deep.
• There is a conveyor system for removing the body trays from inside the morgue.
• The conveyor system has Derlin rollers and is mounted to the frame with screws. It is removable.
• Water drain siphons are installed inside the chamber to allow water to flow out when washing the chamber interiors.
• The body trays can carry loads up to 120 kg.
• Portable (mobile) design.
• Equipped with 2 swivel wheels with brakes and 2 swivel wheels without brakes.
• The morgue unit operates on 220 V, 50 Hz mains voltage.
• Use with a Hydraulic Stretcher (Lifter) is recommended for placing bodies on all floors without manual handling.
• Optional Features: Vital Signs Monitoring System, Lighting System, Humidification System, Infant Body Tray, Chamber Cooling to -20 °C