Material	AISI 304 Grade Stainless Steel
Capacity	1 Body
Motor Group Number	1 unit
Motor Group Type	Removable Motor
Door Type	Side Opening
Operating Temperature	0 °C / +5 °C (Optional: -20 °C)
Unit Type	Monoblock
External Insulation	40 mm Polyurethane (40-42 kg/m³)
Door Features	Plastic-Based Gasket, Name Plate
Control System	1 Digital Numeric Display
Defrost Type	Automatic
Body Tray	1 unit (590193010 mm), 120 Kg Load Capacity
Conveyor Features	Delrin Rollers, Screw-Mounted to the Body, Removable Outside the Cell
Mobility	Wheeled (2 braked swivel casters and 2 swivel casters)
Operating Mode	220 V, 50 Hz Mains Voltage
Optional Equipment	Vital Sign System, Lighting System, Humidification System, Infant Body Tray, Cell Cooling Feature to -20 °C
Package Type	Stretch Wrap (Optional: Wooden Crate)

Please fill in your information and we will get back to you shortly.

Side-Opening Morgue Unit – Single Body Capacity (TGY1)

Motor Position:

Rear
Top

Manufactured from AISI 304 grade stainless steel material.
It has a capacity of 1 corpse.
Operates with 1 motor group.
Produced with “Demountable Motor Technology” that allows service personnel to fix motor group faults without entering the cell.
Side loading.
Operating temperature: 0 °C / +5 °C (Optional: -20 °C)
The unit is produced as a monoblock (single piece).
Unit insulation: 40-42 kg/m³ density compressed polyurethane.
Insulation thickness is 40 mm.
Plastic-based gaskets are used in the door frames to prevent the cold air inside the unit from conducting with the outer coating sheets. The gaskets have plastic beds and are replaceable.
Each cell is operated by a digital numeric display placed on the motor cabinet of that cell, preventing accidental operation of other cells.
The unit has an automatic defrost system, and defrost time can be adjusted via digital displays.
The unit has 1 corpse tray with dimensions of 590*1930*10 mm. The height of the corpse trays is 30 mm and the depth is 10 mm.
A conveyor system is available to remove the corpse trays from the mortuary.
The conveyor system includes Delrin rollers, and the conveyors are attached to the body with screws. They are removable.
When the interior of the mortuary cells is washed, there is a water drain siphon inside the cells for water drainage.
The corpse trays can carry a load of 120 kg.
It has portability (mobility) feature.
Equipped with 2 swivel casters with brakes and 2 swivel casters without brakes.
The mortuary unit operates on 220 V, 50 Hz mains voltage.
It is recommended to use it with a Hydraulic Stretcher (Lifter) to place the corpse on all layers without human contact.
Optional Features: Vital Sign System, Lighting System, Humidification System, Baby Corpse Tray, Cell Cooling Capability to -20 °C

Made of AISI 304 grade stainless steel material.
Capacity: 1 body.
Operates with 1 motor group.
Manufactured with "Split Motor Technology".
Side loading type.
Operating temperature: 0 °C / +5 °C (Optional: -20 °C)
The unit is manufactured as a monoblock.
Unit insulation: compressed polyurethane with a density of 40-42 kg/m³.
Insulation thickness is 40 mm.
Plastic-based gasket is used on door frames to prevent cold air conductivity with the outer sheet metal. The gaskets have plastic bearings and are replaceable.
Each cell is operated by a digital numeric display placed on the motor cabinet, preventing accidental operation of another cell.
The unit has an automatic defrost system and defrost timing can be set via digital displays.
The unit has 1 body tray measuring 590*1930*10 mm. The tray height is 30 mm and depth is 10 mm.
A conveyor system is available for removing body trays from inside the morgue.
The conveyor system uses Delrin rollers and is screwed to the body. It is removable.
There is a water drain siphon inside the cell to allow accumulated water to drain when washing the morgue cell interiors.
The body trays have a load capacity of 120 kg.
Portable (mobile) feature.
Equipped with 2 braked swivel wheels and 2 swivel wheels.
The morgue unit operates on 220 V, 50 Hz mains voltage.
It is recommended to use with a Hydraulic Stretcher (Lifter) to place the body on all floors without manual handling.
Optional Features: Vital Signs System, Lighting System, Humidification System, Infant Body Tray, Cell Cooling Feature to -20 °C.

Key Features
Get a Quote

Material	AISI 304 Grade Stainless Steel
Capacity	1 Body
Motor Group Number	1 unit
Motor Group Type	Removable Motor
Door Type	Side Opening
Operating Temperature	0 °C / +5 °C (Optional: -20 °C)
Unit Type	Monoblock
External Insulation	40 mm Polyurethane (40-42 kg/m³)
Door Features	Plastic-Based Gasket, Name Plate
Control System	1 Digital Numeric Display
Defrost Type	Automatic
Body Tray	1 unit (590193010 mm), 120 Kg Load Capacity
Conveyor Features	Delrin Rollers, Screw-Mounted to the Body, Removable Outside the Cell
Mobility	Wheeled (2 braked swivel casters and 2 swivel casters)
Operating Mode	220 V, 50 Hz Mains Voltage
Optional Equipment	Vital Sign System, Lighting System, Humidification System, Infant Body Tray, Cell Cooling Feature to -20 °C
Package Type	Stretch Wrap (Optional: Wooden Crate)

Please fill in your information and we will get back to you shortly.

Morgue Units

Hydraulic Funeral Stretchers

Autopsy, Dissection and Washing Tables

Operating Room Equipment

Hand Washing Units

Anatomy Equipment

Stainless Steel Cabinets

Medical Trolleys

Coffins

Pathology Equipment

Sterilization Equipment

General Hospital Equipment

Blood and Vaccine Storage Cabinets

Side-Opening Morgue Unit – Single Body Capacity (TGY1)

Other Products

Front-Opening Morgue Unit – Single Body Capacity (DP1)

Front-Opening Morgue Unit – Single Body Capacity (TG1)

Side-Opening Morgue Unit – Single Body Capacity (DPY1)

Front-Opening Oversized Morgue Unit – Single Body Capacity (DPO1)

Our Contact Information

Side-Opening Morgue Unit – Single Body Capacity (TGY1)

Other Products